Patriot Campers Gen3 X1 Lets You Tow a Lighter Camper Off-Road

Quick Facts:

  • Product: Patriot Campers Gen3 X1, a new off road camper trailer built in Australia.
  • Base tare: 1,973 lb (895 kg), a pre-production estimate.
  • Aggregate trailer mass: 3,296 lb (1,495 kg), which leaves 1,323 lb of base payload.
  • Size: 12.1 ft long, 6.4 ft wide and 6.2 ft tall in travel mode.
  • Suspension: Trinamic Core coilovers with 7.9 in of travel.
  • Price: US$54,900 introductory, as listed by Patriot.
  • Best for: Overlanders who want a lighter trailer with a built-in tent.

 5 min read

Overview

Patriot Campers has launched the Gen3 X1, an off road camper trailer with a base tare weight of 1,973 lb. The maker lists it at US$54,900 as an introductory price. Compared to the Gen2 X1 at US$73,000, the new trailer weighs less and costs less.

The Gen3 X1 keeps the format Patriot built its name on. Specifically, it is a compact trailer with an electric hardlid and an integrated tent. Patriot released the first X1 in 2013 and calls the Gen3 a return to the original. Also, this version uses a structural aluminum body, a redesigned Rigilite chassis and a new suspension called Trinamic Core.

Everything below comes from Patriot’s Gen3 X1 page and its range and Gen2 pages. However, Patriot labels the Gen3 weights pre-production estimates. Therefore, treat each number as the maker’s target until owners weigh production trailers.

Patriot Campers Gen3 X1 Weight and Payload

Patriot lists a base tare weight of 895 kg (1,973 lb) and an aggregate trailer mass, or ATM, of 1,495 kg (3,296 lb). ATM is the most the loaded trailer is rated to weigh. As a result, the gap leaves 600 kg (1,323 lb) of base payload for options, water, gas and luggage.

Payload disappears quickly. For example, a full 100 L (26 gal) water tank adds about 220 lb. A second 100 Ah battery, 400W of roof solar, a fridge, a diesel heater and side MOLLE panels are all options, and each one counts against the 1,323 lb. Because Patriot’s online configurator estimates option weight as you build, use it before you order.

Patriot lists no drawbar weight for the Gen3 X1 on its launch or range pages. Therefore, weigh the tongue yourself once the trailer is loaded for a trip. A tongue weight scale such as the Sherline LM 1000 reads the load on your hitch before you leave the driveway. Its 1,000 lb capacity covers a trailer in this class.

🏆 TONGUE WEIGHT CHECK: trailer owners who load a camper to its limit
Sherline LM 1000 - Trailer Tongue Weight Scale - 1000LB

Sherline LM 1000 - Trailer Tongue Weight Scale - 1000LB

★★★★☆ 4.5 400 ratings
$195.90 as of Nov 16, 10:36 am

Reads the weight on your hitch for loads up to 1000 lb. Check the fit with your coupler style before you buy.

We earn a commission if you make a purchase, at no additional cost to you.

Key Specs at a Glance

Specification Details
Base tare 1,973 lb (895 kg), pre-production estimate
ATM 3,296 lb (1,495 kg)
Base payload 1,323 lb (600 kg)
Length by width 12.1 ft by 6.4 ft
Departure angle 36 degrees
Tires and wheels 285/70R17 mud-terrain on 17 by 9 alloys
Brakes Electric-over-hydraulic, 11.2 in discs
Hitch Cruisemaster DO35
Water 100 L (26 gal) tank, 10 L (2.6 gal) hot water
Power 100 Ah lithium, 200 Ah optional

Patriot Campers Suspension, Brakes and Chassis

Trinamic Core uses a triangulated radius-arm layout built around the trailer’s lower weight. Patriot says the layout cuts unsprung weight. It also claims 7.9 in (200 mm) of travel with coilover shocks as standard. Optional Formula F4R remote-reservoir shocks add adjustable damping for sustained corrugations.

A Rigilite chassis supports a powder-coated structural aluminum body. Patriot uses Aerojoin weldless assembly instead of relying on welded joints. If you want to know why builders choose this approach, our piece on aluminum trailer frames explains the trade-offs.

Underneath, a steel rear scrub bar, bash guards and a higher-mounted spare protect the underside. The body also fits compatible aftermarket 35-inch tires, although the standard tires are 285/70R17. Finally, a fan-driven dust system pressurizes the compartments with filtered air. However, treat the suspension and dust claims as the maker’s until owners report back.

Jeep towing the Patriot Campers Gen3 X1 through a rocky forest track
Jeep towing the Wildfire Gen3 X1 through a rocky forest track. Photo: Patriot Campers

Tent, Kitchen and Power at Camp

An electric hardlid opens from a driver-side switch and closes over the tent, mattress and bedding. The queen mattress measures about 80 by 60 in. Also, a freestanding 270-degree awning covers the kitchen. In addition, optional Change Room and Multi-room add-ons extend the sheltered space. Our guide to choosing an overland trailer or a rooftop tent covers who benefits from each setup.

The kitchen is L-shaped, with stainless benchtops, a gas cooker and a slide-out tray for a fridge. Patriot supplies a 10 L (2.6 gal) hot water system and an external shower. In addition, a diesel air heater is optional for the sleeping area.

Power starts with a 100 Ah lithium battery, an IQ100 monitor and a REDARC BCDC1240D charger. A second battery takes capacity to 200 Ah. For the US market, Patriot lists an optional 1,500W REDARC RS2 inverter. Also, two optional 200W roof panels add up to 400W of solar.

Patriot Campers Gen3 X1 tent and awning set up at a bush campsite
Gen3 X1 tent and awning set up at a bush campsite. Photo: Patriot Campers

Patriot Campers Gen3 X1 vs. Gen2 X1

On Patriot’s own figures, the Gen3 X1 is 519 lb lighter at base tare weight, about 21 percent less than the Gen2’s 2,492 lb. Its ATM is 231 lb lower, at 3,296 lb against 3,527 lb. As a result, base payload rises from 1,035 lb to 1,323 lb by subtraction.

Price moves more. The Gen2 lists at US$73,000 and the Gen3 at US$54,900, a gap of US$18,100 or about 25 percent. However, Patriot says the Gen2 price includes tariff and shipping from Las Vegas. Its Gen3 page does not say what the US figure includes.

The hardware differs too. Specifically, the Gen2 uses X-Cruise airbag suspension, while the Gen3 moves to Trinamic Core coilovers. Because equipment differs, compare trailers by configuration rather than by headline numbers.

What This Means for You

First, compare your vehicle’s tow rating with the 3,296 lb ATM, not the 1,973 lb tare. A loaded trailer weighs far more than the empty one. Then subtract the tongue weight from your truck’s payload, since it sits on your hitch. As a former Gladiator owner, I would check tongue weight first on any midsize rig.

Patriot lists MAXTRAX recovery boards with a mount as an option. Buying a pair separately is another route. Compare the cost of a set such as the MAXTRAX MKII boards below with Patriot’s option.

🏆 RECOVERY GEAR: trailer owners who tow into sand, mud or snow
MAXTRAX |MKII Lime Green Recovery Boards Pair | Heavy Duty Off-Road Traction Tracks for Sand Mud Snow Overlanding (MTX02LG)

MAXTRAX |MKII Lime Green Recovery Boards Pair | Heavy Duty Off-Road Traction Tracks for Sand Mud Snow Overlanding (MTX02LG)

★★★★★ 4.8 700 ratings
$279.99 as of Nov 16, 1:57 pm

A pair of MKII boards sold separately from Patriot. Weigh them against your trailer payload before you pack them.

We earn a commission if you make a purchase, at no additional cost to you.

Second, ask Patriot what US$54,900 includes. Specifically, ask about tariff, shipping, dealer fees and a delivery date. As of November 14, the pages I read list no US delivery timing for the Gen3 X1, and Patriot’s US stock page shows other models.

Final Thoughts

The Gen3 X1 suits overlanders who want a built-in bed and kitchen without the weight of a larger trailer. Its biggest strength is the lower tare, 519 lb under the Gen2 on Patriot’s own figures. Midsize truck and SUV drivers, especially, have the most to gain from this drop.

The trade-offs are plain. Patriot’s weights are estimates, the US price is introductory, and options eat into a 1,323 lb payload quickly. Therefore, a fully equipped Gen3 X1 will weigh more than the base figure suggests. For me, the payload is the number to watch.

Wait for owner weigh-ins before you order, and ask Patriot to put the price and delivery date in writing. If a used trailer fits your budget better, our used overland trailer guide shows what to inspect. Whichever route you take, weigh the loaded trailer once and keep the ticket.

FAQ

How much does the Patriot Campers Gen3 X1 cost in the US?

Patriot lists US$54,900 as an introductory price, with AUD 57,900 for Australia. However, optional equipment and on-road costs are extra. Therefore, ask Patriot what the US figure includes before you order.

How much does the Gen3 X1 weigh?

Patriot lists a base tare of 1,973 lb and an ATM of 3,296 lb, which leaves 1,323 lb of base payload. The maker calls these pre-production estimates, so production trailers differ.

Does the Gen3 X1 have a built-in tent?

Yes. An electric hardlid closes over an integrated tent with a queen mattress. Optional Change Room and Multi-room add-ons extend the space, and the Multi-room requires the Change Room.

Does Patriot Campers sell the Gen3 X1 in the US yet?

Patriot lists a US price and a North Las Vegas sales address. However, its US stock page showed other models on November 14, so ask Patriot for Gen3 X1 delivery timing.


Related Articles

Latest Articles

- Advertisement -